Paving stones are still one of the most commonly used materials for building various types of surfaces in gardens and parks. However, in order for it to fully preserve its properties, it must be laid on a properly prepared area. The associated work will not only ensure a flat surface, but also significantly increase the service life of the track.The first stage is to create a suitable substrate for the cube. Thanks to it, the coating used will not move, and the cubes will not collapse, for example, under the influence of water. The substrate consists of a substructure and a backfill.The foundation largely depends on the type of soil on which the cube will be laid. The more slushy the soil, the thicker the base layer should be. The second factor that also affects the thickness of the foundation is how the sidewalk is used. The more pressure is put on her, the more she should be about the same. Moreover, thanks to it, it is possible to create a 3-4% drop in the surface, so that it will be possible to conduct water rather than accumulate it, which as a result will have a negative impact on the material.The foundation material is selected depending on the above factors. An aggregate with a fraction of 30-60 mm is most often used. It is usually no more than 40 cm thick, but this may change in the case of swampy land.
Laying paving stones
Paving stones can be laid only after leveling the foundation level. Thus, it is possible to obtain a flat plane that will evenly distribute the pressure exerted on it. This is extremely important not only for sidewalks and backyard terraces, but also for driveways. Thanks to this, it is possible to create a road surface that will better withstand the pressure of heavy vehicles.It should also be remembered that proper foundation preparation has a significant impact on the service life of the coating under construction. Your best entertainment Luckyrebel Casino
